Silicone Carbide Spiral Nozzle Si 3 N 4 bonded SiC(N-SiC) nozzle is mainly used in Fuel Gas Desulfurization (FGD) system. As one component of FGD system, the nozzle can spray out lime slurry in certain angle, flow-rate and granularity, for the slurry to completely react with gases such as SO 2 , NO 2 , HF, which comes from burning boiler. Silicon carbide spiral nozzles, 1/4SPJT-SIC6007 - Spray2, SIC silicon carbide Spiral Spray nozzle (SPJT) is a solid cone or hollow cone spray nozzle, spray angle range of 60 degrees -170 degrees to 120 degrees routine. At 3 bar pressure, the liquid flow rate range of 5.5 a 140 l / min, is widely used in flue gas desulfurization dust, waste gas treatment, waste water treatment, fire extinguishing spray cleaning and other fields.
The spiral nozzle is a solid cone or hollow cone spray nozzle with a spray angle of 50-170 degrees. The liquid flow rate ranges from 5.5-4140 l/min. With smooth runners, this compact nozzles structure greatly reduce liquid obstruction, allowing the liquid to reach large flows on pipes of a given size. silicon carbide nozzle|sic nozzle|desulfurization|reaction silicon carbide nozzle for desulfurization can serve a long time ,about 10~20 times longer than common metal ,4~7 times longer than alumina,especially suitable to serve in harsh conditions for fgd.This kind of silicon carbide nozzle for flue gas desulfurization which is made by reaction bonded silicon carbide is high strength, high hardness, corrosion resistance, high temperature resistance, high temperature, long service life for flue gas desulfurization wastewaterSilicon Carbide Nozzles, Flue Gas Desulfurization Nozzles Silicon Carbide Nozzles, Flue Gas Desulfurization Nozzles, Bi-directional Double Tangential Hollow Cone Nozzles. We Can Help. BETE DTH nozzles, available in silicon carbide, feature a double Hollow Cone tangential design. The BETE bi-directional DTH series feature two orifices, each of which forms a hollow cone pattern, with one spraying downward and the other spraying upward.